Painting equipment ZITREK Z8626 et al .

Sandblasting installations are used if it is necessary to clean various surfaces by air-sandblasting from paint, rust, scale and other contaminants. Sandblasting equipment is also suitable for degreasing surfaces. It is often used in the repair of premises. Sandblasting machines have a preparatory function in the repair of buildings – they are used to clean the walls, then to apply paint or putty on them.
Models: IM-30, DSMG-25, DSMG-75, DSMG-100, DSMG-160, DSMG-200, DSMG-250, DSMG-75F-efficiency, DSMG-75F, DSMG-25F-efficiency, DSMG-25F, DSMG-250F-efficiency, DSMG-250F, DSMG-250 2-post, DSMG-25 (fraction), DSMG-200F-KPD, DSMG-200F, DSMG-160F-KPD, DSMG-160F, DSMG-100F-KPD+helmet+FD-1, DSMG-100F-KPD, DSMG-100F.

• Sandblasting machines. Technical specifications

The SOV – 4 M (4/2)-M abrasive collection and recovery system is designed for the collection and recovery of abrasive, steel and lead shot with a fraction of no more than 3 mm. Loading of abrasive into a pneumatic blasting unit, as well as for the transportation of bulk materials over remote distances (up to 25 m), when used together with a container for the accumulation of material.

• SOV – 4 M (4/2)-M. Technical specifications

The jet cleaning device is an injection-type device for air-sandblasting internal and external surfaces from paint, scale and corrosion, various types of contamination, degreasing. It is optimally suited for processing medium-sized areas, due to its low cost and reduced consumption of compressed air.
Model: ASO-40E, ASO-150, ASO-200.

• Jet cleaning devices. Technical specifications

Piston airless high-pressure painting apparatus for carrying out painting works on a construction site. The paint is sucked out of the bucket and fed through a hose to the spray gun for spraying.
The device is used for painting on a construction site, painting facades, painting walls, painting metal, applying soil and paint to walls and metal, painting wooden structures, applying impregnation to wood, painting wooden and concrete fences, painting factory and warehouse premises.
Models: Z440, Z8626, Rongpeng R450, Rongpeng R650, Z1800, Z390.

• Reciprocating compressors. Technical specifications

The CO-71B paint sprayer is designed for coating with paint and anti-corrosion materials by air spraying.

• CO-71B. Technical specifications

The manual spray gun SO-20V is suitable for painting surfaces and spraying trees. It works with water-chalk and water-lime solutions, the density of which is 1.3x103 kg / m3 at plus air temperature.

• CO-20B. Technical specifications

Plaster mini-station FS-01 (FS-02) includes a hopper bucket plaster SN-01 (SN-02), which operates with compressors of average capacity (from 280 l/min).

• FS-01, FS-02. Technical specifications

Plaster hopper bucket SN-01, SN-02 is an innovative way of applying plaster or any other cement-sand mixture using a compressor. With the help of a wall hopper bucket, any unskilled builder can carry out plastering work on vertical surfaces in a shorter time compared to manual plastering.

• SN-01, SN-02. Technical specifications

Decorative and finishing pneumatic sprayer FR-300, FR-301 and FR-306 is designed to perform the following works: - decorative plastering with the use of multi-colored granite crumbs with fractions from 4 to 10 mm

• Pneumatic sprayers. Technical specifications

Abrasive blasting chambers: CSR-110-I-M, CSR-110-I-M-M, CSR-110-I-M-FV, CSR-110-I-M-M-FVR, CSR-110-I-S-M, CSR-110-I-S-FV-M, CSR-110-I-S-FVR-M, CSR-110-I-FVR-M, CSR-110-I-FVR-M, CSR-110-N-M, CSR-110-N-M-M-FVR, CSR-110-N-FVR-M, CSR-115-I-M, CSR-115-I-FVR-M, CSR-115-I-FVR-M, CSR-115-N-FVR-M, CSR-130-I-M, CSR-130-I-FV-M, CSR-130-I-FVR-M, CSR-130-N-M, CSR-130-N-FVR-M, CSR-60-N-M, CSR-80-I-M, CSR-80-I-FV-M, CSR-80-I-FVR-M

• Abrasive blasting chambers. Technical specifications

Universal paint gun H-827 with an upper tank. It is used for applying various paint coatings (base paints, top varnishes, acrylic paints, powder filler primers, anti-corrosion primers, etc.) Can be used for applying water-based paints.

• H-827. Technical specifications

The S-990S paint sprayer is designed for painting work. The spray gun tank is located at the bottom and is able to hold 1 liter of paint. The nozzle diameter of this model is 1.5 mm.

• S-990S. Technical specifications

The S-990G2 paint sprayer is designed for painting works. The spray gun tank is located on top and is able to hold 0.6 liters of paint. The nozzle diameter of this model is 1.5 mm.

• S-990G2. Technical specifications

• Set of pneumatic tools 5PCS, 5PCS-3. Technical specifications

• Paint injection tank TP-08. Technical specifications

Price list