Shipping throughout Russia and to other countries

Mounting pistols, for pumping ZITREK PPM 603, GFT-603, etc.

The mounting gun PPM603 is designed for hammering steel dowels-nails by powder (direct) mounting. The tool does not require pre-drilling of mounting holes, which significantly reduces the time of fastening metal profiles, rails and other structural elements to concrete, steel and stone bases. The housing has a low thermal conductivity. The principle of operation of the gun is simple: the energy of the powder gases drives the piston, which forcefully drives the fasteners into the material. The design of the device eliminates the shooting of the support with a nail, which contributes to its safe operation.

GFT-603, GFT-5 are designed for hammering dowel nails into building structures made of concrete, reinforced concrete, low-carbon steel and brickwork when attaching building elements, equipment and utilities to them in construction. With the help of a gun, a fixed attachment is made to brickwork and concrete of metal structures up to 4 mm thick and non-metallic (wood, plastic, etc.) with a thickness of 10 to 55 mm, to structures made of low-carbon steel of metal materials up to 4 mm thick.

The gun for mounting foam FM-1 is indispensable for construction and finishing works. Adjusting the foam pressure with a ratchet screw ensures uniform application. For ease of use, an ergonomic plastic handle is provided.

The 8036b viscous fluid gun is designed for pumping technical and viscous liquids. The tool is equipped with a long narrow nozzle, which allows you to work in hard-to-reach places, for example in narrow openings or crevices. The metal case is perfectly protected from mechanical damage during impacts and falls, which significantly extends the service life.

The 8036J sandblasting pneumatic pistol with a tank is designed for cleaning various surfaces with a jet of sand. The model has an impressive working resource and the ability to work for a long time without stopping. The principle of operation on compressed air provides for a low fire and explosion hazard of the working process.

The pneumatic pistol for pumping TG-61, TG-62, TG-63 is a pneumatic tool that is convenient when working in places that are not provided with electricity. This model is designed for pumping tires in a home workshop or a small car service.

Price list

All ZITREK products

The group "New Technologies" offers for review the products of the plant ZITREK: gasoline vibrating plates, vibration rammers, vibration tips, vibration lines, flexible shafts, surface vibrators, concrete mixers, mortar mixers, smoothing machines
  • Rebar cutting and bending machines ZITREK
    Rebar cutting and bending machines
    GQ-50, SB-40C, etc.
  • Drilling and grinding machines ZITREK
    Drilling and grinding machines
    DP-90, MD-200, etc.
  • Pipe bends, crimpers ZITREK
    Pipe bends, crimpers
    SWG-1 and others.
  • Mounting saws, locksmith vises ZITREK
    Mounting saws, locksmith vises
    PM-1200, PM-2000, BV-125, etc.
  • Seam Cutters ZITREK
    Seam Cutters
    CNQ12-1, Z3000 wet, etc.
  • Mounting pistols, for pumping ZITREK
    Mounting pistols, for pumping
    PPM 603, GFT-603, etc.
  • Painting equipment ZITREK
    Painting equipment
    Z8626 et al .
  • Mortar mixers ZITREK
    Mortar mixers
    RN 150, etc.
  • Petrol vibrating plates ZITREK
    Petrol vibrating plates
    CNP 10-1 et al.
  • Diesel vibrating plates ZITREK
    Diesel vibrating plates
    CNP 330A-3 AES, etc.
  • Concrete mixers ZITREK
    Concrete mixers
    C 1206 et al .
  • Petrol vibration rammers ZITREK
    Petrol vibration rammers
    CNCJ 72 FW-2, etc.
  • Electric vibration rammers ZITREK
    Electric vibration rammers
    CNCJ-80, CNCJ 72 FW-E, etc.
  • Vibrake ZITREK
    Vibrake
    EV-270-A-1.7, VRP, VRS, etc.
  • Vibrators and vibration equipment ZITREK
    Vibrators and vibration equipment
    IV-99, IV-98 E, etc.
  • Smoothing machines ZITREK
    Smoothing machines
    RT 36 et al.
  • Snow plows ZITREK
    Snow plows
    ST3000, ST6706, etc.
  • Electric motors. by drive ZITREK
    Electric motors. by drive
    IV-117 and others.
  • Motor pumps ZITREK
    Motor pumps
    PGT500, PGT1300, etc.
  • Lifting equipment ZITREK
    Lifting equipment
    PA-125250, etc.
  • Air heaters ZITREK
    Air heaters
    BFG-50, etc.
  • Pumping equipment ZITREK
    Pumping equipment
    GP-70-50P, etc.
  • Compressors, receivers ZITREK
    Compressors, receivers
    RV-110-10, z3k320-50, etc.
  • Buckets and containers ZITREK
    Buckets and containers
    TR-0.25, etc.
  • Hoses, hoses, flexible shafts ZITREK
    Hoses, hoses, flexible shafts
    AIR HOSE-19, etc.
  • Steel towers-tours ZITREK
    Steel towers-tours
    SV-100, VSP-250-0.7, etc.
  • Diamond Discs ZITREK
    Diamond Discs
    CN 300, etc.

About ZITREK

ZITREK equipment (Czech Republic) is produced by a small company located in the suburbs of Prague. The family that owns the company has been manufacturing various construction equipment for several generations. The accumulated experience allows us to speak about the reliability of the created engineering systems.

  • production

    The equipment is manufactured at several factories in Hungary, Croatia, Italy, China and Russia. Direct contacts with manufacturers allow us to offer customers attractive prices and high quality of service.

  • development

    The constant development and implementation of new technological solutions ensures increased efficiency and reliability of the created equipment, as well as provides a long-term warranty.

  • support

    All employees are trained and certified by most of the manufacturers, which allows the company to conduct comprehensive engineering support of projects.

Information Board ZITREK

Learn more about our products ZITREK.
  • Price list for equipment производства ZITREK
    Price list for equipment

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: